So, as I got a Honeycomb Yoke, I had the problem that in contrast to HOTAS devices, yokes like the Honeycomb do not some with a Trust Lever.
The solution was for me the Thrustmaster Quadrant Airbus Edition and running is without the flight stick that is also available as a combo with that device.
Now, while installing the TFHT driver package made it working in Windows 10 and discoverable in Flight Simulator, nothing was assigned to it. As I tried assigning everything manually, I failed in doing so, so I asked Thrustmaster tech support for help and they send me a detailed PDF called “abnormal procedure” that I want to share with you:
So here is what I sent to THQ Nordic, Nvidia and the Steam Community as a solution:
Hi there all, thanks again for going on with troubleshooting with me. Since neither a discussion thread on Steam Boards , nor NvIdia or THQ Nordic tech support could help me. I wanna share the solution which was posted recently in a German thread on this game’s Steam discussion forum: Go to the game properties in Steam and change language from English to German. The game will still be in English by the way but it will run flawlessly.
Why that is no idea. But I wanted to share that the said solution also worked for me! 🙂
If you wonder why the Skype Cloud Recording only records 8 frames per seconds, worry not, you are not the only one having this issue. In fact this change has been done globally for all users using Skype. Due to the pandemic, the amount of users signing up to Skype has risen a load and the server load skyrocketed. In order to balance out this load, the recording functionality has reduced the 15 fps to 8 fps temporarily until March 2021.
The team who made this decision didn’t bother to tell tech support department about it, hence nobody knew about it when I contacted tech support about this first.
I went through all support levels until I have reached T3 which just called me this morning, to inform me about the situation.
having fully dug into PC gaming in 1995, the world was clear for me.
You had a CD version of games and disk versions. CD versions were also called “speech versions” or “talkie version”.
prime examples for me were games like Monkey Island, Sam & Max, Simon The Sorcerer.
Now that Command & Conquer Remastered Collection got released, I started orienting myself backwards towards DUNE.
I understood that there is a disk version (1992) of DUNE the strategic adventure and a CD version with voice overs (1993). According to wikipedia it is also claimed at the time of writing this , that it was the first game ever released on CD-ROM.
Another Wikipedia entry says that however the game Star Trek 25th Anniversary was released in 1992 on disk AND CD with voice aka walkie talking version, weird. Just checking on another wiki, there it says the CD version was released 1993
Its successor Star Trek Judgement Rites however was even released in more CD versions than just the talkie one, i.e. the CD version would feature better graphics and more cut scenes like the “movie and sound pack” that was available for the disk version originally.
Then there was obviously another edition of the CD version released on CD in 1995 (The same year the Mac version was released) which was the talkie version of this game.
For DUNE e.g. you can find out that the CD Versions from the SOFT PRICE line, are simply 3.5″ disk version copied 1:1 onto CD, so the speech is missing here:
even if it says “CD-ROM Version” on the front, don’t buy it!
The While Label release however even mentions the voice performance on its back of the box:
Now having a look however on the White Label Start Trek 25th Anniversary / Judgment Rites CD Collection you find that only the first is mentioned for its voice performance on the back of its box:
Despite this was released in 1993, the same year Judgment Rites CD version was released, this does not contain a talkie version.
The talkie version was released in 1995 however:
So for some games, the CD versions are sometimes not the ones you are after!
Login with your Weibo# and password – This will result in an error message saying “Your account hasn’t set a password, please reset the password for login” – Aha finally something we can work with!
Click on “Forgot Password”
Enter your mobile phone number that you used when registering for Weibo in the Weibo International app in the following format: “00<country code><your number as dialed from abroad> Pass the Captcha test.
It will now ask you to enter a Captcha, but that is wrong. Instead it means to say it will send you a SMS PIN code – once received to your mobile phone enter it (there is a countdown so be quick!)
Enter your desired account password!
Success! Now your Weibo International account has a password assigned which can be used to login to Weibo from the homepage or connect to your Pixiv or other accounts! 🙂
When WatchOS 6.2 was released, installing it on my Apple Watch Series 1 took a couple of tries, as it either wouldn’t find the new WatchOS version in the iPhone Apple Watch App on my iPhone 7 Plus or it would fail downloading. Once it was installed, it would crash and reboot the Watch Series 1 every 5 minutes. It took me two days but finally managed to do an over-the-air update on the Apple Watch Series 1 connecting to my home wifi to WatchOS 6.2.1 hoping it would improve the situation. It didn’t, the situation worsened.
So, now it would not only crash but be sluggish and almost not react anymore on inputs, if it crashes, it would crash without showing something on the screen, so I constantly force-reboot it!
Now googling for it, every site and solution guide said, to unpair it via the iPhone’s Apple Watch app, then go to settings app on the watch and select wipe all data. However once I confirmed this, the dialog would simply close and nothing would happen.
As I didn’t want to call Apple Support and spend hours on troubleshooting, I got an idea how to factory reset it using a trick:
1) Unpair it from the iPhone via the Apple Watch App. 2) Connect it to the home wifi network 3) go to icloud.com –> Find my phone –> Erase
This would factory reset the phone. Once it has been fully re-charged, pair it as an already existing Apple Watch by restoring from a backup!
5 years ago, when my old kitchen weight scale broke, I have found myself being fascinated of the Beurer KS 800 Kitchen Scale because it has a screen inside and it guides you graphical through the steps of a recipe connected via bluetooth to your iPhone and it’s Beurer recipe app.
After a bit of discussion with the Beurer tech support, a workaround has been found.
There is another kitchen scale of Beurer, the KS28 without bluetooth and hence the app requires activation since the last update (which causes the issue with the Beurer KS 800 in the first place, as before you could simply say “send to scale” in any recipe of the app) but since the KS28 has noo bluetooth module inside, the KS28 ships with a QR code one can scan to activate the app!
For your convenience, find that QR Code here:
This will force activation of the app. Now select any recipe in the app and on the bottom select “Send to scale”. It will force a request to pair your KS 800 to iOS 13.x and voilla, the kitchen scale works again! 🙂
When you were among the first who installed the Rockstar Launcher, you’d get GTA 5 San Andreas for free. But for some reason it would not detect my already installed Max Payne 3 purchased DVD of the game.
Reason for this is, the one in the Rockstar Launcher has a few more DLCs for free included and installs in a different folder name than what was used by the original installation.
This is how you can migrate your installation to the one supplied by the Rockstar Launcher:
Find the installation folder of your current Max Payne 3.
Rename the sub-folder to “Max Payne 3 Complete Edition
Launch the Rockstar Games Launcher > Click on “Install” for Max Payne 3
Please choose the install location as a folder that has Max Play 3 installed previously.
Next, click Proceed. The Rockstar Games Launcher should now start the download, but the download bar will move fast skipping all the installed files. Any missing files will be installed.
Please wait until it is completed as it may take about 30 to 60 minutes depending on your internet connection.
Delete the .EXE files of the now obsolete non-complete edition
You can now run Max Payne 3 – The Complete Edition” from the Rockstar Launcher
It will ask you if you want to move the local savegame to the cloud, you can decide for “Yes” here.
I recently switched from Sagate’s OEM version of Acronis True Image called “Seagate DiscWizard” to Acronis True Image 2020. It resulted in the setup routine detecting the OEM version (which is according to Seagate’s Knowledge Base from 2013)
VirtualDiskSetup.msi will work in Windows 10 yes, but according to Acronis support this driver is from Windows 8 and not officially supported in Windows 10 and end of life since 2013.
So how can this be resolved?
From an email to Acronis Support in which I described how I have done it:
so I have continued on this as circumstances changed a bit:
I decided to get an addtional SATA III controller to put in an empty PCIe slot I still had in my computer and put an SSD onto it.
So here is what I have done:
As the HDD in question was 6 TB, 4 spread across 2 partitons with the Seagate DiscWizard Extended Capacity Manager and the 2 TB accessible on the front of the HDD was the Windows 10 system disk, I have done the following steps so far:
1) I have tried True Image 2020 Clone Disk Wizard, but as the new SSD is 1 GB smaller than the HDD (due to the nature of SSDs), I got warning messages saying there might be the possibility that Windows cannot boot after the clone is done as the destination disk is smaller than the source. Despite I answered twice to proceed anyway, after the 2nd confirmation, the Clone Disk Wizard window simply closed without any further message on the screen.
So I gave up on this and instead used the free version of EaseUs Partition Master and cloned the 2 TB Windows 10 partition of the 6 TB HDD to the 2 TB SSD.
2) After that, I added the cloned Windows installation on the SSD via EasyBCD manually to the Windows 10 boot menu.
3) I booted my PC into an old Windows 7 installation I still have and disabled the Extended Capacity Manager. then I went to the Windows own disk manager and removed the 2 TB partition and then used EaseUs Partition Master to remove the 495 MB recovery partition too as windows own Disk Manager would not because of “not enough free diskspace to perform operation”.
4) Then converted the undefined partition from MBR to GPT.
5) Opened the Seagate DiscWizard again. A notification window poped up stating “No Extended Capacity Partitions found, you can partition the disk using “Add New Disc” functionality.
6) “Add New Disc” —> Was able to create a full 6 TB GPT partition
7) Booted back into Windows 10 onto the SSD.
8) Opened Acronis , went to recovery, said disk from the previously backed up extended capacity “Disk” stored on my NAS, to the unpartitioned 5.55 TB disk. However after 40 minutes of waiting, no activiy on the disk even. So I aborted this try and now create 2 partitions with EaseUS Partition Master that are both 3 TB and try again but this time recovery from partiton to partition instead.
I hope this will work!
Not quite the way it was supposed to work and I still have no idea why the clone disk wizard of True Image 2020 left me hanging with no clue, but it is busy recovering now
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.